Welcome to your go-to resource before, during and after a storm.

Save this page! In the event of a storm, check back here for the latest updates and notices in regards to delivery and service.

Propane Resources

In the event that you smell gas or in an emergency, it may be necessary to turn your propane tank off. To turn the tank off…

1. Locate the propane tank on your property

2. Lift the top cover on the tank

3. Locate the valve on the top of the tank

4. Turn the valve clockwise until you cannot turn it anymore

When you cannot turn the valve any further, you have shut the propane supply off to your home.

During a power outage, if you use a propane powered generator, we will ask for specific pieces of information when you request a delivery in order to determine your run rate, aka how fast you are consuming propane.

Knowing the KW of your generator, propane tank size and an accurate percentage of propane in your tank will allow us to calculate your run rate* and determine how many hours until a delivery is required.

*We build buffers into our calculation in order to ensure you receive a delivery in advance of when it is needed.

1. Locate the propane tank on your property (it is important to know which tank fuels your generator)

2. Lift the cover on the top of the tank

3. The gauge is a dial located towards the top of your tank

4. The gauge reads as a percentage of volume you have in your tank - 80% is considered a full tank

1. Lift the cover on the top of the propane tank that fuels your generator

2. Locate the gauge on the top of the tank

3. The gauge reads as a percentage of volume you have in your tank - 80% is considered a full tank

Propane is stored as a liquid under pressure in your tank. Propane liquid, like water, will expand when heat is added to it.* Tanks are filled to 80% of their capacity to account for the effects of pressure and temperature. This 20% buffer allows for the propane to expand freely as temperatures change throughout the day without danger of the tank becoming over pressurized.

*Fun fact: propane liquid expands in volume nearly 17 times greater than water when exposed to the same temperature increase.

Generator Resources

If your generator runs consecutively for 48 hours or more during a power outage, it is important to turn your generator off and check the level of oil every 24 hours in order to ensure peak efficiency through the duration of the storm.

See instructions below on how to turn the unit off and check and add oil below!

1. Lift the top cover of the unit

2. Locate the Manual/Auto/Off control on the right side of the unit

3. Select OFF on the keypad

4. Press ENTER on the keypad

If your generator runs consecutively for 48 hours or more during a power outage, it is important to turn your generator off and check the level of oil every 24 hours in order to ensure peak efficiency through the duration of the storm.

1. Lift the top cover of the unit

2. Locate the Manual/Auto/Off control on the right side of the unit

3. Select OFF on the keypad

4. Press ENTER on the keypad

5. Remove the front cover by lifting it up and then out

6. Locate the oil dipstick and remove it. Check that the oil is at the proper level on the stick

7. If oil needs to be added, remove the oil cap and insert a funnel

8. If your generator is serviced by Quinoco, you must add Synthetic 5W-30 oil

9. Recheck the dipstick for proper oil level, then seal tightly

10. Replace the front cover on the unit

11. Select AUTO on the keypad

12. The generator should start within 10 seconds

If your generator is serviced by Quinoco, we use Synthetic 5W-30 oil in your generator. We suggest customers keep oil on hand in the event it needs to be added. Synthetic 5W-30 oil can be purchased at a car parts store or any major gas station like a Shell or Mobil.

In the event that the power goes out and your generator does not automatically run, it is important to know how to clear a fault code in order to start the generator.

generac generator

1. Lift the top cover of the unit

2. Locate the control panel on the right side of the unit

3. Select OFF on the keypad

4. Press ENTER on the keypad to clear the fault code

5. Select AUTO, the generator should start within 10 seconds

6. If it does not start, start the generator manually by selecting MANUAL

7. When power is restored to your home, return to the generator and select AUTO on the control to restore it to automatic mode

kohler generator

1. Lift the top cover of the unit

2. Locate the control panel on the right side of the unit

3. Select OFF on the keypad (this clears the fault code)

4. Next, select AUTO, the generator should start after 3 seconds

5. If it does not start, start the generator manually by selecting MANUAL

6. When power is restored to your home, return to the generator and select AUTO on the control to restore it to automatic mode

generac generator

kohler generator

Interested in a Generator?